Debain mouse problem

[Mark Street]

sw_cursor instead of SWcursor

You may want to remove the additional option and Clock.

Give it a whirl.......


On 12 Jul 2002, error wrote:

>
>
> > What version of the neomagic chipset do you have?
> >
> > What is your entry for the SW Cursor in the Device section of your
> > XF86Config-4 config file.
> >
> > What version of XFree86 are you using, package or compiled from source.
> >
>
> I have the Neomagic 2380 as shown below.
> I have the precompiled apt-get'ed xfree server of version 4.1.0-16
> It's the only version so far to get this baby up and running under
> debian.
>
> I might add this is being written from debian in evolution.
>
> Here is the config file:
>
> Section "ServerLayout"
> 	Identifier     "XFree86 Configured"
> 	Screen      0  "Screen0" 0 0
> 	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> 	RgbPath      "/usr/X11R6/lib/X11/rgb"
> 	ModulePath   "/usr/X11R6/lib/modules"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
> EndSection
>
> Section "Module"
> 	Load  "dbe"
> 	Load  "dri"
> 	Load  "extmod"
> 	Load  "glx"
> 	Load  "pex5"
> 	Load  "record"
> 	Load  "xie"
> EndSection
>
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "keyboard"
> 	Option      "XkbRules" "xfree86"
> 	Option      "XkbModel" "pc101"
> 	Option      "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> 	Identifier  "Mouse0"
> 	Driver      "mouse"
> 	Option      "Protocol" "PS/2"
> 	Option      "Device" "/dev/mouse"
> EndSection
>
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
> 	HorizSync    31.5 - 48.5
> 	VertRefresh  50.0 - 70.0
> EndSection
>
> Section "Device"
> 	Identifier  "Card0"
> 	Driver      "neomagic"
> #This is the added stuff:
> #It still doesn't work with it :)
> 	option	"overideValidateMode"
> 	option "SWCursor"
> 	Clocks 25.18
> #End of added stuff
> 	VendorName  "Neomagic"
> 	BoardName   "NM2380"
> 	ChipSet     "MagicGraph 128 series"
> 	BusID       "PCI:1:0:0"
> EndSection
>
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	DefaultDepth     16
> 	SubSection "Display"
> 		Depth     1
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     4
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     8
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     15
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     16
> 		Modes    "1024x768"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     24
> 	EndSubSection
> EndSection
>
>