[NBLUG/talk] Help: Newbie and proxy server running SBS2000

[Jennifer Tracy]

Micxz,

I have already posted the output for ifconfig.  Please see the previous 
post, since I REALLY don't want to type it all in again.

My resolv.conf has two name servers:  208.201.224.11 and 208.201.224.33 but 
not 10.0.0.2.

10.0.0.2 has to be a nameserver too?

Jenn


>From: micxz <micxz at micxz.com>
>Reply-To: talk at nblug.org
>To: talk at nblug.org
>Subject: Re: [NBLUG/talk] Help: Newbie and proxy server running SBS2000
>Date: Wed, 11 Jun 2003 13:41:37 -0700 (PDT)
>
>
>OK, so you do see "eth0" and it's setting when you try ifconfig. Good Can
>you post the output on the list for us?
>
>Most likly your gateway will be 10.10.10.2 and your subnet mask should be
>255.255.255.0.
>
>Also try to ping the linux box from the windows server as well e.g. open
>the windows "command prompt" and type ping 10.10.10.X (chnage x with the
>ip
>of your client linux machine.)
>
>Also look in /etc/resolv.conf you should have two
>nameservers in there as well as 10.10.10.2 but this should not affect
>pinging IP's.
>
>--
>Micxz
>
>
>On Wed, 11 Jun 2003, Jennifer Tracy wrote:
>
> > I do see something VERY similar to what you show below.   There were no 
>"RX
> > packets" only "TX Packets".  I also see a second "batch" for something
> > called "lo".
> >
> > I cannot ping my server which on the internal network is 10.0.0.2.
> >
> > Jenn
> >
> >
> > >From: "Micxz (lovedialup.com)" <an_email at micxz.com>
> > >Reply-To: talk at nblug.org
> > >To: talk at nblug.org
> > >Subject: Re: [NBLUG/talk] Help: Newbie and proxy server running SBS2000
> > >Date: Wed, 11 Jun 2003 13:00:29 -0700
> > >
> > >
> > >Jen'
> > >
> > >If you want to know the settings for your network card under linux 
>issue
> > >the following command AS ROOT:
> > >
> > >ifconfig
> > >
> > >You should see something like:
> > >
> > >eth0      Link encap:Ethernet  HWaddr 00:01:02:G5:EF:38
> > >           inet addr:10.10.10.1  Bcast:10.10.10.255  Mask:255.255.255.0
> > >           inet6 addr: [mac addy here]/64 Scope:Link
> > >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> > >           RX packets:14108 errors:0 dropped:0 overruns:0 frame:0
> > >           TX packets:444 errors:0 dropped:0 overruns:0 carrier:0
> > >           collisions:0
> > >           RX bytes:4582889 (4.3 Mb)  TX bytes:160896 (157.1 Kb)
> > >
> > >If you don't see eth0:
> > >
> > >Then stop your network card is not configured yet!
> > >
> > >If you do see eth0 then try this command:
> > >
> > >ping xx.xx.xx.xx
> > >
> > >change xx.xx.xx.xx with your network servers IP or the proxy's IP
> > >address.
> > >
> > >Can you ping the network?
> > >
> > >Micxz
> > >
> > >Jennifer Tracy wrote:
> > > >
> > > > augie,
> > > >
> > > > If I had the first clue how to ping the proxy server in Linux I 
>would
> > >try
> > > > that first.  I fully admit to being WAY more Windows savvy than 
>Linux.
> > > >
> > > > Apparently my netwrok card is at least active.  Don't ask what a
> > >headache
> > > > that was to make happen.  But I can't see the network, and I don't 
>know
> > >how
> > > > to search for computers on the network like I can in Windows.
> > > >
> > > > I have no idea if my netwrok card is even configured correctly.
> > > >
> > > > I am not generally a stupid person, but this is driving me nuts (as 
>my
> > > > fiance says a short trip but nonetheless :-)
> > > >
> > > > Jenn
> > >_______________________________________________
> > >talk mailing list
> > >talk at nblug.org
> > >http://nblug.org/mailman/listinfo/talk
> >
> > _________________________________________________________________
> > Add photos to your e-mail with MSN 8. Get 2 months FREE*.
> > http://join.msn.com/?page=features/featuredemail
> >
> > _______________________________________________
> > talk mailing list
> > talk at nblug.org
> > http://nblug.org/mailman/listinfo/talk
> >
>_______________________________________________
>talk mailing list
>talk at nblug.org
>http://nblug.org/mailman/listinfo/talk

_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. 
http://join.msn.com/?page=features/junkmail