[NBLUG/talk] Help: Newbie and proxy server running SBS2000

Jennifer Tracy tiny_tyrant at hotmail.com
Wed Jun 11 13:39:01 PDT 2003


I gave it a static IP address: 10.0.0.59 and the subnet mask 255.255.255.0

Still doesn't believe it is on the network.

Jenn


>From: "Jeffrey Miller" <jmiller at batnet.com>
>Reply-To: talk at nblug.org
>To: <talk at nblug.org>
>Subject: Re: [NBLUG/talk] Help: Newbie and proxy server running SBS2000
>Date: Wed, 11 Jun 2003 13:18:47 -0700
>
>Perhaps you could copy the inet address and netmask of the Linux machine's
>network card?
>
>If your server is at 10.0.0.2, where is your Linux machine, and what is its
>netmask?  (For example, with a netmask of 255.255.255.0, your Linux machine
>would have to be numbered 10.0.0.<something> in order to believe it was on
>the same local net as the server).
>
>-- Jeff Miller
>
>----- Original Message -----
>From: "Jennifer Tracy" <tiny_tyrant at hotmail.com>
>To: <talk at nblug.org>
>Sent: Wednesday, June 11, 2003 1:05 PM
>Subject: Re: [NBLUG/talk] Help: Newbie and proxy server running SBS2000
>
>
> > I do see something VERY similar to what you show below.   There were no
>"RX
> > packets" only "TX Packets".  I also see a second "batch" for something
> > called "lo".
> >
> > I cannot ping my server which on the internal network is 10.0.0.2.
> >
> > Jenn
> >
> >
> > >From: "Micxz (lovedialup.com)" <an_email at micxz.com>
> > >Reply-To: talk at nblug.org
> > >To: talk at nblug.org
> > >Subject: Re: [NBLUG/talk] Help: Newbie and proxy server running SBS2000
> > >Date: Wed, 11 Jun 2003 13:00:29 -0700
> > >
> > >
> > >Jen'
> > >
> > >If you want to know the settings for your network card under linux 
>issue
> > >the following command AS ROOT:
> > >
> > >ifconfig
> > >
> > >You should see something like:
> > >
> > >eth0      Link encap:Ethernet  HWaddr 00:01:02:G5:EF:38
> > >           inet addr:10.10.10.1  Bcast:10.10.10.255  Mask:255.255.255.0
> > >           inet6 addr: [mac addy here]/64 Scope:Link
> > >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> > >           RX packets:14108 errors:0 dropped:0 overruns:0 frame:0
> > >           TX packets:444 errors:0 dropped:0 overruns:0 carrier:0
> > >           collisions:0
> > >           RX bytes:4582889 (4.3 Mb)  TX bytes:160896 (157.1 Kb)
> > >
> > >If you don't see eth0:
> > >
> > >Then stop your network card is not configured yet!
> > >
> > >If you do see eth0 then try this command:
> > >
> > >ping xx.xx.xx.xx
> > >
> > >change xx.xx.xx.xx with your network servers IP or the proxy's IP
> > >address.
> > >
> > >Can you ping the network?
> > >
> > >Micxz
> > >
>
>
>_______________________________________________
>talk mailing list
>talk at nblug.org
>http://nblug.org/mailman/listinfo/talk

_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.  
http://join.msn.com/?page=features/featuredemail




More information about the talk mailing list