[NBLUG/talk] Wireless: one more time... (pci)

[Mark Street]

Different driver dude!!!
http://www.admtek.com.tw/download/ADM8211.htm

Belkin  	802.11b  	F5D6001 ver.2  	PCI  	ADMTek

Go man go!!!

On Saturday 20 September 2003 09:36, Dave Sisley wrote:
> I hate to do this to you, but I could use some hints on setting up the
> pci card in the desktop.  The configuration you helped me with on my
> laptop seems to be pcmcia specific, and I don't think it will
> translate directly to the desktop.
>
> I have installed the atmel drivers on the desktop.  During 'make
> config' I said no to the USB and pcmcia options, but there were no
> explicit pci choices except for 'miniPCI'.  I went and said yes to
> that.  The installation returned no errors (as far as I can tell).
>
> Running ifconfig only gets me 'lo'. Running lspci returns the
> following:
>
> 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host
> Bridge (rev 03) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL
> [Brookdale-G] Chipset Integrated Graphics Device (rev 03) 00:1d.0 USB
> Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02)
> 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02)
> 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02)
> 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02)
> 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82)
> 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02)
> 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02)
> 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02)
> 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev
> 02) 01:05.0 Network controller: Linksys: Unknown device 8201 (rev 11)
> 01:06.0 Communication controller: Conexant: Unknown device 2702 (rev 01)
> 01:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev
> 01)
>
> I am assuming that the Network controller is the one I want, but I
> don't know why it's id'd as Linksys.  Here's the what lspci -v says
> about it:
>
> 01:05.0 Network controller: Linksys: Unknown device 8201 (rev 11)
> 	Subsystem: Accton Technology Corporation: Unknown device 3201
> 	Flags: bus master, medium devsel, latency 32, IRQ 11
> 	I/O ports at c000 [size=256]
> 	Memory at ed012000 (32-bit, non-prefetchable) [size=1K]
> 	Expansion ROM at <unassigned> [disabled] [size=128K]
> 	Capabilities: [c0] Power Management version 2
>
> ------
>
> I can see that installing the driver has created an atmel.conf file in
> /etc/pcmcia (which I edited on the laptop to get that card to work),
> but there's no comparable 'pci' directory in /etc.
>
> I really appreciate the help.
>
> -dave
> _______________________________________________
> talk mailing list
> talk at nblug.org
> http://nblug.org/mailman/listinfo/talk

-- 
Mark Street, D.C.
Red Hat Certified Engineer
Cert# 807302251406074
--
Key fingerprint = 3949 39E4 6317 7C3C 023E  2B1F 6FB3 06E7 D109 56C0
GPG key http://www.streetchiro.com/pubkey.asc