[NBLUG/talk] Drive not detected after moving to a new case

[Christopher Wagner]

If it helps, in my experience, I've found some IDE controllers are more 
tolerant than others of master/slave mismatches.  I would double-check 
(just to be sure) that the drive is set to master or cable select, and 
that it's on the end of the chain. Also, as was suggested elsewhere, I'd 
try plugging it in to a different machine or an external enclosure.

I hope that helps..

- Chris

Lincoln Peters wrote:
> On Mon, Jul 20, 2009 at 8:22 AM, Robbie Brown<brown at sonic.net> wrote:
>   
>> Did you check the jumpers for the drive? Maybe the cd rom was set as
>> master or something and now the hard drive is a slave all by itself?
>>     
>
> This hard drive has always been on its own IDE controller.  The CD-ROM
> drive used to share an IDE controller with the DVD drive, but I did
> verify that the DVD drive is still at least recognizable (I can eject
> and close the tray from the command-line).
>
>
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://nblug.org/pipermail/talk/attachments/20090722/a5c5a44c/attachment.htm