[NBLUG/talk] Help: Newbie and proxy server running SBS2000

[Jennifer Tracy]

ifconfig

eth0   Link encap:Ethernet  HWaddr 00:10:5A:E7:95:09
          inet addr:10.0.0.59  Bcast:10.0.0.255Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3553 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:10
          RX bytes:0(0.0 b)  TX bytes:213180 (208.1 Kb)
          Interruprt: 18 Base Address: 0xec80

lo      Link encap:local loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:359654 errors:0 dropped:0 overruns:0 frame:0
          TX packets:659654 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:43218530 (41.2 Mb)  TX bytes:43218530 (41.2 Mb)

route:

Kernel IP routing table

Destination                    Gateway                   GenMask           
Flags Metric Ref Use iface
10.0.0.0                        *                             255.255.255.0  
  U     0        0    0    eth0
169.254.0.0                  *                             255.255.0.0       
U     0        0    0    eth0
127.0.0.0                      *                             255.0.0.0       
    U     0        0    0    lo

Jenn - please note that I specifically set my ip address for the network 
card to 10.0.0.59  during my trying to get it working myself phase.

Jenn

>From: troy <fryman at sonic.net>
>Reply-To: talk at nblug.org
>To: talk at nblug.org
>Subject: Re: [NBLUG/talk] Help: Newbie and proxy server running SBS2000
>Date: Wed, 11 Jun 2003 13:17:36 -0700
>
>On Wed, Jun 11, 2003 at 01:05:29PM -0700, Jennifer Tracy wrote:
> > I do see something VERY similar to what you show below.   There were no 
>"RX
> > packets" only "TX Packets".  I also see a second "batch" for something
> > called "lo".
> >
> > I cannot ping my server which on the internal network is 10.0.0.2.
> >
>
>You're doing great, Jenn :)
>
>Can you please post the output from ifconfig?
>Also please post the output from the 'route' command (again as root)
>
>-troy
>_______________________________________________
>talk mailing list
>talk at nblug.org
>http://nblug.org/mailman/listinfo/talk

_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*  
http://join.msn.com/?page=features/junkmail