[NBLUG/talk] Help: Newbie and proxy server running SBS2000

[micxz]

OK, so you do see "eth0" and it's setting when you try ifconfig. Good Can
you post the output on the list for us?

Most likly your gateway will be 10.10.10.2 and your subnet mask should be
255.255.255.0.

Also try to ping the linux box from the windows server as well e.g. open
the windows "command prompt" and type ping 10.10.10.X (chnage x with the
ip
of your client linux machine.)

Also look in /etc/resolv.conf you should have two
nameservers in there as well as 10.10.10.2 but this should not affect
pinging IP's.

--
Micxz


On Wed, 11 Jun 2003, Jennifer Tracy wrote:

> I do see something VERY similar to what you show below.   There were no "RX
> packets" only "TX Packets".  I also see a second "batch" for something
> called "lo".
>
> I cannot ping my server which on the internal network is 10.0.0.2.
>
> Jenn
>
>
> >From: "Micxz (lovedialup.com)" <an_email at micxz.com>
> >Reply-To: talk at nblug.org
> >To: talk at nblug.org
> >Subject: Re: [NBLUG/talk] Help: Newbie and proxy server running SBS2000
> >Date: Wed, 11 Jun 2003 13:00:29 -0700
> >
> >
> >Jen'
> >
> >If you want to know the settings for your network card under linux issue
> >the following command AS ROOT:
> >
> >ifconfig
> >
> >You should see something like:
> >
> >eth0      Link encap:Ethernet  HWaddr 00:01:02:G5:EF:38
> >           inet addr:10.10.10.1  Bcast:10.10.10.255  Mask:255.255.255.0
> >           inet6 addr: [mac addy here]/64 Scope:Link
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:14108 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:444 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0
> >           RX bytes:4582889 (4.3 Mb)  TX bytes:160896 (157.1 Kb)
> >
> >If you don't see eth0:
> >
> >Then stop your network card is not configured yet!
> >
> >If you do see eth0 then try this command:
> >
> >ping xx.xx.xx.xx
> >
> >change xx.xx.xx.xx with your network servers IP or the proxy's IP
> >address.
> >
> >Can you ping the network?
> >
> >Micxz
> >
> >Jennifer Tracy wrote:
> > >
> > > augie,
> > >
> > > If I had the first clue how to ping the proxy server in Linux I would
> >try
> > > that first.  I fully admit to being WAY more Windows savvy than Linux.
> > >
> > > Apparently my netwrok card is at least active.  Don't ask what a
> >headache
> > > that was to make happen.  But I can't see the network, and I don't know
> >how
> > > to search for computers on the network like I can in Windows.
> > >
> > > I have no idea if my netwrok card is even configured correctly.
> > >
> > > I am not generally a stupid person, but this is driving me nuts (as my
> > > fiance says a short trip but nonetheless :-)
> > >
> > > Jenn
> >_______________________________________________
> >talk mailing list
> >talk at nblug.org
> >http://nblug.org/mailman/listinfo/talk
>
> _________________________________________________________________
> Add photos to your e-mail with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
>
> _______________________________________________
> talk mailing list
> talk at nblug.org
> http://nblug.org/mailman/listinfo/talk
>